induction tempering stainless plate

2003/08/11

induction tempering steel wire online_4induction tempering steel wire online_1induction tempering steel wire online_2induction tempering steel wire online_3

2003/08/11

induction tempering steel wire online by 40KW induction heater (UM-40AB-HF)_1induction tempering steel wire online by 40KW induction heater (UM-40AB-HF)_2

2003/08/11

induction tempering by UHFInduction Tempering are widespread use in the automotive and automotive-supply industries. In fact, induction tempering can be performed on all hardened components—bars, joints, shafts, etc.

2013/07/25

UHF induction temperingInduction Tempering are widespread use in the automotive and automotive-supply industries. In fact, induction tempering can be performed on all hardened components—bars, joints, shafts, etc.

2013/07/25

• UM-60AB-RF induction heating system equipped with a remote workhead enclosure for double capacitor/buss modules. Zone 1 needs a 0.25 μF capacitor, while Zone 2 requires 0.66 μF• An induction heating coil designed and developed specifically (half open)

2013/07/05

UIHM Induction is also present in a various of industries for preheating—primarily the automotive, cable and wire, electrotechnical, and tube and pipe industries. In many cases, our induction preheating solutions are integrated into production lines. Usin

2013/05/03

Induction Preheating Postweld Heating Treatment Equipment

2013/03/30

Preheating oil drilling shaft Objective To preheat a steel pipe to 500F (260C) before welding.Material Steel shaft assembly 5” to 8” OD (127-203.2mm) with a 2” (50.8mm) heat zone.Temperature 500F (260C), if higher temperatures are required, heat ti…

2008/08/03

Tempering Spring Objective Temper a spring by heating it to 300C (570F) in 2 – 4 secondsMaterial Stainless steel AISI 302 springs- different length from 60 to110 mm outer diameters 8 mm.- wire diameter from 0.3 to 0.6 mmTemperature 300C (570F)Freque…

2008/08/03