induction brazing carbide to Steel shaft

Objective Brazing a cone shaped carbide to a stainless steel shaft for a digger Material Cone shaped carbide 1.12” (28.4mm) dia, 1.5”(38.1mm) tall, stainless steel shaft 1.12” (28.4mm) dia and various length, black brazing flux and braze shims Tempera…

induction bonding Steel clips

Objective To heat metal clips and press-bond them into rubber seals. The metal needs to be heated to 250F to 350F with a cycle time not exceeding 3 seconds Material Steel clips and rubber sealer blocks Temperature 250F to 350F Frequency 373 kHz Equipme…

induction de-bonding stainless Steel

Objective To separate bonded stainless steel / carbon fiber assemblies by heating tang, softening the adhesive bond Material Stainless steel and carbon fiber inserts Temperature 300 F (149C) Frequency 200 kHz Equipment • Power of 6kW induction heating…

induction bonding plastic sleeve to stainless Steel handle

Objective Heating end of a stainless steel handle with a plastic sleeve coated with heat adhesive for a bonding applicationMaterial 1” (25mm) OD stainless steel handle 0.30” (7.6) thick covered with a plastic sleeve that is coated with a heat adhesive be…

induction debond rubber seal from Steel

Objective Debond a fluorocarbon rubber seal from a carbon steel oil seal Material 4” (10.2cm) OD carbon steel oil seal with a fluorocarbon rubber seal Temperature 1200 F (649 C) Frequency 179 kHz Equipment • Power of 6kW induction heating system, equi…

induction brazing Steel orthodontic parts

Objective To heat a batch of orthodontic parts to 1300F (704C) within 1 second in an inert atmosphere for brazing. Material Small stainless steel orthodontic parts, silver braze alloy, no flux, 3 1/ 8” (79.3mm) graphite susceptor disk with 1” (25.4) cen…

induction bonding rubber to Steel

Objective To bond rubber gaskets to the top and bottom of a steel gas tank assembly. Material Flat and round rubber gaskets, steel gas tank assembly Temperature 300 to 350F(148.9-176.7C) Frequency 183 kHz for the flat gasket; 231 kHz for the round gaske…

induction brazing Steel tube

Objective To braze a steel tube to a steel “T” fitting Material 1” (25.4mm) diameter steel tubing, steel fitting, braze slug and black flux Temperature 1400F (760C) Frequency 198 kHz Equipment • Power of 15kW induction heating system, equipped with…

induction brazing stainless Steel dental assembly

Objective To heat a steel dental assembly to 1400F (760C) for brazing Material Stainless steel plates 0.118” (3mm) square and 0.078” (2mm) high, stainless steel hook, mesh, two pieces of graphite 0.375”(9.5mm) square cross section, 4” (101.6mm) long a…

induction brazing Steel mold

Objective Heating steel golf ball mold to brazing dimple insert Material Golf ball mold 2” in diameter, braze flux paste, dimple insert Temperature 1400 F (760 C) Frequency 206 kHz Equipment • Power of 20 kW induction heating system, equipped with a …