what is induction heating?

induction heatingWhat is Induction Heating? Induction heating is the process of heating an electrically conducting object (usually a metal) by electromagnetic induction, where eddy currents (also called Foucault currents) are generated within the metal an…

induction heat the plough discs

Heat the plough discs Objective To heat the circumference of plough discs before hot rolling (sharpening) processMaterial Flat Boron steel discs, OD 460 to 710 mm (18 to 28”) thickness 3.2 to 10 mm (8/64 to 25/64”)Temperature 725C 1335FFrequency 75 kHzEq…

what is induction hardening

induction hardeningPrincipal methodsSingle shot hardeningIn single shot systems the component is held statically or rotated in the coil and the whole area to be treated is heated simultaneously for a pre-set time followed by either a flood quench or a drop…

what is induction heat treatment

What is heat treatment eat treatment of metal is a method of manipulating the metal (in terms of its physical properties) to achieve the operational condition of the metal—both for machining and then for operation. Most metals can be made to be soft or ha…

what is annealing

What Is AnnealingAnnealing is a not just a simple process with just one effect and a single result. It is a complex technique that can be carried out in many different ways and at different steps in the manufacturing process to obtain different effects on …

induction shrink fitting wrist pin into connecting rod

Shrink fitting wrist pin into connecting rod Objective Assemble connecting rods with a more accurate control of the heatMaterial Rod has an OD of .9125” (23.18mm), knuckle has an ID of .9125” (23.18mm) with an interference of .0001” (.0025mm). Knuckle a…

induction heat television picture tube glass

Heat Television Picture Tube Glass Objective: The incorporation of solid state RF induction heating into the television picture tube industry, specifically the insertion of attachment pins into the already formed picture tube glass panel. Four pins are…

induction brazing piston valve

Objective Brazing a steel piston valve assembly Material Steel piston valve 4.5” dia (11.43cm), tungsten carbide plate and braze Temperature 1350 F Frequency 91 kHz Equipment • Power of 90kW induction heating system, equipped with a remote workhead c…

why induction brazing is better

different induction brazing workInduction Brazing for Aviation Fan blades and blades for boxes, different parts for numerous components in hydraulic systems and fuel systemsInduction Automotive Brazing Copper or steel components like brake linings and …

what is furnace brazing

What is brazing?The term "brazing" can be applied to any processwhich joins metals (of the same or dissimilar composition)through the use of heat and a filler metalwith a melting temperature above 840 F (450 C),but below the melting point of the…